[. . . ] Register your product and get support at Enregistrez votre produit et obtenez de l'aide sur Your Video RF Modulator is designed to convert the separate audio and video signals (from a video camera, computer, portable VCR, satellite receiver, DVD player, etc. [. . . ] You need the following items, not supplied with your Video RF Modulator, to connect it between a video input source (video game, video camera, satellite receiver, DVD player, etc. Two 75-ohm coaxial cables with F-type connectors · If your TV does not have a VHF 75-ohm F-connector, you will also need a 75-ohm-to-300-ohm matching transformer · One video shielded cable with RCA Plugs and one audio (stereo) cable with RCA Plugs OR Dubbing Cable for VCR/DVD with RCA Plugs OR 3 shielded cables with RCA Plugs · Connect an S-Video or video cable between the S-Video or video output jack on your video source and the RF Modulator's S-VIDEO or VIDEO IN jack. Follow these steps to connect your RF Modulator: D Note If both the S-Video and standard video are hooked up, the S-Video will be given priority Connect an audio cable between the audio output jacks on your video source and the RF Modulator's AUDIO IN jacks. Audio Source 3 Connect the 75-ohm coaxial cables to the RF Modulator using one of these two (2) options: Option 1: If your TV is already connected to another VHF input source (such as cable TV, VCR, etc. Disconnect the current CATV/antenna connection from the 75-ohm input terminal of your VHF source, and reconnect it to the RF Modulator's ANT IN terminal. Then add a 75-ohm coaxial cable connected between the TO TV terminal of the RF Modulator and the 75-ohm input terminal of your VHF source. To TV Option 2: If your TV is not already connected to another VHF source: 5 1. Disconnect the current CATV/antenna cable from the 75-ohm input terminal of your TV, and reconnect it to the RF Modulator's ANT IN terminal. [. . . ] Incidental, special and consequential damages are disclaimed where permitted by law. [. . . ]